Wilson® RH2150 Hardness Tester

Wilson® RH2150
Wilson® RH2150
Wilson® RH2150
Wilson® RH2150
Wilson® RH2150
Wilson® RH2150
Previous slide
Next slide

The Wilson RH2150 hardness tester is designed for high volume production labs and production floor Rockwell testing, as well as supporting worldwide research facilities with its vast amount of testing scales. The RH2150 is available in two different sizes, with a vertical capacity of 10 and 14 inch (254 and 356mm respectively). It is fully protected from outside influences with sheet metal casing and a loadcell protection. The intuitive user interface aligns with our DiaMet™ software – making it simple to learn and easy to use. A DiaMet™ package is available to have all advanced features of DiaMet™.

  • Auto-stop clamping device holds down the sample and secures it during the testing.
  • The adjustable LED workspace illumination highlights the test location to ensure clarity and full visibility.
  • Indenter extensions are optionally available in several sizes to enable testing also on hard to reach test locations (only usable with clamping device).
  • Standard 0.75 in(19mm) pin anvils are shared with the Wilson RB2000 and R574 testers to simplify accessories in a lab.
  • The operator panel can be adjusted on the frame or taken off completely to put aside the machine if needed – ensuring full flexibility and an ergonomic test process.
  • USB connection for easy data output to memory drives.
  • In conjunction with the clamping device, the external footswitch can be used in multiple ways:
    • Clamping and manual start
    • Clamping and automatic start
    • Manual release after test
    • Automatic release after test
  • Rockwell Fast Mode, achieving test results in seconds.

Related Products

4in [100mm]
6in [150mm]
Max. internal reach diameter 9.5mm Min. inside diamter 14mm
Max. internal reach diamete 26mm Min. inside diameter 35mm
2.5in [63mm]
7.5in [190mm]
0.5in [12.7mm] stem height cylindrical parts < 0.25in [6.5mm]
1in [25mm] stem height cylindrical parts < 0.25in [6.3mm]
for cylindrical parts > 0.25in [6.3mm]
for cylindrical parts 0.25 - 3in [6 - 7.6mm]
for cylindrical parts 2 - 8in [50 - 203mm]
for cylindrical parts 1/16 - 1in [1.6 - 25mm]
for pieces with slight taper
0.5 in [12.7mm] stem height 0.27in [7mm] spot diameter
1in [25mm] stem height 0.27in [7mm] spot diameter
for HR30T scale 0.39in [10mm] spot diameter

Downloads

Videos

Buehler an ITW Company
Buehler Products