Metallography
Archived Posts

Hardness testing is a fundamental characteristic in analyzing component properties, and, as an important materials testing tool, this critical parameter can performed and measured by

Materials testing, including hardness testing, is a fundamental but useful element in analyzing component properties, and can be accomplished by a multitude of methods and

What is Gage Repeatability & Reproducibility (GR&R)? Gage Repeatability & Reproducibility, commonly known as a GR&R, is a statistical method used in process control (SPC)

Nondestructive testing (NDT) or Nondestructive evaluation (NDE) is a method of materials testing to assess the characteristics of a component without altering or destroying it.

Hardness Testing Basics Hardness, as applied to most materials, and in particular metals, is a valuable, revealing, and commonly employed mechanical test that has been

Hardness, as applied to most materials, and in particular metals, is a valuable, revealing, and commonly employed mechanical test that has been in use in

Early Hardness Testing Hardness, as applied to most materials, and in particular metals, is a valuable, revealing, and commonly employed mechanical test that has been

The following are our recommendations for preparing aluminum for metallographic specimen testing according to common characteristics. We will cover both the four step and five

Polishing usually involves the use of one or more of the following abrasives: diamond, aluminum oxide (Al2O3), and amorphous silicon dioxide (SiO2) in collidal suspension.