SimpliMet 4000 Mounting Press

Watch the SimpliMet 4000 Mounting Press Video

The Fastest Mounting Press Designed for 24/7 Use. Eliminate bottlenecks at the mounting stage, rapidly transforming your cut samples to specimens ready for grinding and polishing.

The SimpliMet 4000 mounting press, was tested in extreme conditions, and simulated the duty cycle of the busiest labs in the world, providing high reliability in continuous use environments.

The automatic SimpliMet 4000 mounting press packs fast mounting cycles into limited bench space, optimizing productivity. By replacing older, slower, larger mounting presses; capacity can be doubled for the same amount of space.

Use your mounting press out of the box without the wait. New employees can be trained quickly and efficiently.

Benefits
Specifications
Ordering
Related Products
Downloads

High reliability in 24/7 use envirionments

The SimpliMet 4000, was tested in extreme conditions, and simulated the duty cycle of the busiestlabs in the world, providing high reliability in continuous use environments.

Optimize Productivity in Your Space

The SimpliMet 4000 packs fast mounting cycles into limited bench space, optimizing productivity. By replacing older, slower, larger presses; capacity can be doubled for the same amount of space.
Fast duplex mounting allows two mounts to be made during the same cycle with negligible increase in cycle time.

Ease of use saves time and protects sample quality

Simple user interface eliminates errors and protects the quality of your sample prep. Everything you need is right on the front panel.
Use your press out of the box without the wait. New employees can be trained quickly and efficiently.

Comfortable to use

The single handed closure mechanism engages quickly, moving you right into your next task.

SimpliMet 4000 Mounting Press Specifications
Operation	Automatic Electrohydrolics
Mounting Mold Sizes	English: 1", 1.25", 1.5" Metric: 25mm, 30mm, 40mm, 50mm
Mounting Parameters
Pressure	1000 - 4400psi(70 - 300bars) operational pressure range +/- 10% Adjustable in 50psi (5bar) increments Preload pressure function applies gradual presssure for delicate specimens 350psi (24bar)
Heat Time	User Selectable time from 1-20 minutes
Heating Tempurature	120° F - 420° F (50° C - 220° C) operation tempurature range
Heating Power	1500 Watt@115VAC / 1900 Watt@230VAC
Cooling Time	User Selectable or Smart Cool User Selectable time from 1-30 minutes Adjustable in 10 second increments Smart Cool Intelligent cooling system automatically cools until sample temperature reaches 40°C
Thermoplasmic Function	Automatically sets correct parameters fro thermoplastic resins such as TransOptic TM and cools the mount in a contolled, linear fashion appropriate for the mounting media
Noise Level Max	62 dB maximum at 1 meter from the front of the machine, while raising and lowering the ram with the mold closure open
Working Environment	Tempurature: 40° F to 104° F / 5° C to 40° C Humidity: 30 - 90% humidity, non-condensing
Electrical
Voltage/Frequency	85-264VAC, 50/60Hz 1 phase
Water inlet	1/4" OD tubing or 3/8" OD tubing
Water Outlet	Drain: 1/4" ID x 1/3" OD hose Vent: 1/4" ID x 1/2" OD hose
Length	26.00" 660mm
Length from rear of machine to front feet	21.25" 540mm
Width	12.25" 311mm
Height Closed	19.62" 498mm
Height Open	20.62" 524mm
Weight	120lbs 54kg
Compliance	CE, PSE, RoHS, WEEE

Part Number	Voltage/Frequency	Quick Quote
20-1011-5001 with 1in Mold Assembly	85-264VAC,50/60Hz	Quick Quote
20-1011-5025 with 25mm Mold Assembly	85-264VAC, 50/60Hz	Quick Quote
20-1011-5125 with 1.25in Mold Assembly	85-264VAC, 50/60Hz	Quick Quote
20-1011-5030 with 30mm Mold Assembly	85-264VAC, 50/60Hz	Quick Quote
20-1011-5150 with 1.5in Mold Assembly	85-264VAC, 50/60Hz	Quick Quote
20-1011-5040 with 40mm Mold Assembly	85-264VAC, 50/60Hz	Quick Quote
20-1011-5050 with 50mm Mold Assembly	85-264VAC, 50/60Hz	Quick Quote