--- title: Coolants for Sectioning and Cutting url: https://www.buehler.com/products/sectioning/sectioning-and-cutting-consumables/coolants-for-sectioning-and-cutting/ date: 2021-09-23T16:52:35+00:00 modified: 2025-01-30T15:31:29+00:00 lang: en_US --- # Coolants for Sectioning and Cutting # Coolants for Sectioning and Cutting ![Coolants for Sectioning and Cutting](https://buehler.com/wp-content/uploads/2023/12/Coolants-for-Sectioning.png) *Coolants for Sectioning and Cutting* ## PROPER COOLING FOR YOUR SECTIONING NEEDS ### Coolants for Sectioning Effectively cool your sample to prevent heat damage with our water miscible and oil based coolants and lubricants. #### Cooling for High Quality Cutting Coolants for Sectioning and Cutting help dissipate heat and remove swarf from the cutting point. Choose Buehler's premium coolants to maintain high quality cutting surface, good blade life, and achieve consistent cutting results. [Shop Now](https://shop.buehler.com/coolant) ### Coolants for Your Cutters #### Cool 3 Fluid ![Cool 3](https://buehler.com/wp-content/uploads/2023/12/Coolant-3.png) Water miscible fluid concentrate for abrasive and precision cutting. Dilute coolant to 1:25 to 2:25, with water. #### IsoCut® Fluid ![IsoCut Fluid](https://buehler.com/wp-content/uploads/2023/12/IsoCut-Fluid.png) Oil based coolant only for use with the IsoMetTM Low Speed saw or any saw with a maximum speed of 500 rpm. ##### Ordering | Cool 3 Fluid | | | --- | --- | | Water miscible fluid concentrate. Dilute coolant to 1:25 to 2:25, with water. | | | Part Number | Description | | [10-6001](https://shop.buehler.com/cool-3-338oz-1l) | 33.8oz \[1L\] | | [10-6004](https://shop.buehler.com/cool-3-1-gal-4l) | 1gal \[4L\] | | [10-6010](https://shop.buehler.com/cool-3-26gal-10l) | 2.6gal \[10L\] | | IsoCut Fluid | | | --- | --- | | Oil based coolant only for use with the IsoMet Low Speed Saw or any saw with a maximum speed of 500rpm. | | | Part Number | Description | | [11-1193-032](https://shop.buehler.com/isocut-fluid-950ml) | 1qt \[0.95L\] | | [11-1193-128](https://shop.buehler.com/isocut-fluid-gallon) | 1gal \[3.8L\] | | Cool 3 Fluid | | | --- | --- | | Water miscible fluid concentrate. Dilute coolant to 1:25 to 2:25, with water. | | | Part Number | Description | | [10-6001](https://shop.buehler.com/cool-3-338oz-1l) | 33.8oz \[1L\] | | [10-6004](https://shop.buehler.com/cool-3-1-gal-4l) | 1gal \[4L\] | | [10-6010](https://shop.buehler.com/cool-3-26gal-10l) | 2.6gal \[10L\] | | IsoCut Fluid | | | --- | --- | | Oil based coolant only for use with the IsoMet Low Speed Saw or any saw with a maximum speed of 500rpm. | | | Part Number | Description | | [11-1193-032](https://shop.buehler.com/isocut-fluid-950ml) | 1qt \[0.95L\] | | [11-1193-128](https://shop.buehler.com/isocut-fluid-gallon) | 1gal \[3.8L\] | ###### Frequently Asked Questions Would you have any recommendations for maintenance of Cool 3? When an abrasive cutter machine is at rest, check that the coolant tank of the recirculating system is filled with coolant to the level recommended, typically about 4” to 6” from the top of the tank. This will allow the pump to effectively deliver coolant to the cut-off wheel and without drawing air intermittently from the coolant tank. Check the coolant level daily. Replace coolant that has evaporated from the coolant tank with fresh coolant pre-mixed with water at the recommended ratio. Would you have any recommendations for disposal of Cool 3? Cool 3 is not considered hazardous for sanitary sewers per RCRA regulations, however local regulations must also be consulted in conjunction with the Cool 3 SDS. When an abrasive cutter machine is at rest, check that the coolant tank of the recirculating system is filled with coolant to the level recommended, typically about 4” to 6” from the top of the tank. This will allow the pump to effectively deliver coolant to the cut-off wheel and without drawing air intermittently from the coolant tank. Check the coolant level daily. Replace coolant that has evaporated from the coolant tank with fresh coolant pre-mixed with water at the recommended ratio. Cool 3 is not considered hazardous for sanitary sewers per RCRA regulations, however local regulations must also be consulted in conjunction with the Cool 3 SDS. ##### Accessories [![Recirculation System 22 Gallon](https://buehler.com/wp-content/uploads/2021/08/102332460-Recirculating-System-22Gal-150x150.jpg)](https://shop.buehler.com/recirculation-systems) [Recirculation System](https://shop.buehler.com/recirculation-systems) ##### Related Consumables [![Abrasive Blades for Sectioning](https://buehler.com/wp-content/uploads/2021/09/Premium-Abrasive-Blade_16in.png)](https://buehler.com/products/sectioning/sectioning-and-cutting-consumables/blades-for-abrasive-cutters/) [Blades for Abrasive Cutters](https://buehler.com/products/sectioning/sectioning-and-cutting-consumables/blades-for-abrasive-cutters/) [![Blades for Precision Cutters](https://buehler.com/wp-content/uploads/2023/10/Precision-Blades.jpg)](https://buehler.com/products/sectioning/sectioning-and-cutting-consumables/blades-for-precision-cutters/) [Blades for Precision Cutters](https://buehler.com/products/sectioning/sectioning-and-cutting-consumables/blades-for-precision-cutters/) ##### Product Literature [![Buehler Product Catalog](https://buehler.com/wp-content/uploads/2023/10/Buehler-Product-Catalog_default_600x782.jpg)](https://en.calameo.com/buehler/read/00639329103cfc405df2c) [Buehler Product Catalog](https://en.calameo.com/buehler/read/00639329103cfc405df2c)