Wilson® RH2150 Hardness Tester

Wilson® RH2150
Wilson® RH2150
Wilson® RH2150
Wilson® RH2150
Wilson® RH2150
Wilson® RH2150
Previous slide
Next slide

The Wilson RH2150 hardness tester is designed for high volume production labs and production floor Rockwell testing, as well as supporting worldwide research facilities with its vast amount of testing scales. The RH2150 is available in two different sizes, with a vertical capacity of 10 and 14 inch (254 and 356mm respectively). It is fully protected from outside influences with sheet metal casing and a loadcell protection. The intuitive user interface aligns with our DiaMet™ software – making it simple to learn and easy to use. A DiaMet™ package is available to have all advanced features of DiaMet™.

  • Auto-stop clamping device holds down the sample and secures it during the testing.
  • The adjustable LED workspace illumination highlights the test location to ensure clarity and full visibility.
  • Indenter extensions are optionally available in several sizes to enable testing also on hard to reach test locations (only usable with clamping device).
  • Standard 0.75 in(19mm) pin anvils are shared with the Wilson RB2000 and R574 testers to simplify accessories in a lab.
  • The operator panel can be adjusted on the frame or taken off completely to put aside the machine if needed – ensuring full flexibility and an ergonomic test process.
  • USB connection for easy data output to memory drives.
  • In conjunction with the clamping device, the external footswitch can be used in multiple ways:
    • Clamping and manual start
    • Clamping and automatic start
    • Manual release after test
    • Automatic release after test
  • Rockwell Fast Mode, achieving test results in seconds.

Related Products

4in [100mm]
6in [150mm]
Max. internal reach diameter 9.5mm Min. inside diamter 14mm
Max. internal reach diamete 26mm Min. inside diameter 35mm
2.5in [63mm]
7.5in [190mm]
0.5in [12.7mm] stem height cylindrical parts < 0.25in [6.5mm]
1in [25mm] stem height cylindrical parts < 0.25in [6.3mm]
for cylindrical parts > 0.25in [6.3mm]
for cylindrical parts 0.25 - 3in [6 - 7.6mm]
for cylindrical parts 2 - 8in [50 - 203mm]
for cylindrical parts 1/16 - 1in [1.6 - 25mm]
for pieces with slight taper
0.5 in [12.7mm] stem height 0.27in [7mm] spot diameter
1in [25mm] stem height 0.27in [7mm] spot diameter
for HR30T scale 0.39in [10mm] spot diameter

Downloads

Videos

Optimize Your Sectioning
Buehler an ITW Company
Buehler Products

Applications of Metamaterials

With Prof. Lorenzo Valdevit

An overview of the definitions and classes of metamaterials will be provided with a specific emphasis to the applications as lightweight structural materials. The various features of structural metamaterials will be discussed as well as the role of metal additive manufacturing in enabling the scale of these materials. Future pathways to the implementation of these unique materials will be presented.

Applications of Light Metals

With Dr. Carl Söderhjelm

The lecture will first review the prototypical structures and identifying properties of various industrially relevant light metals. Then, several case studies will be presented to demonstrate the novel use of these materials in light weighting across different fields. The lecture will conclude with emerging materials and tools to design them.

Additive Manufacturing Overview

With Mr. Brandon Fields

The field of metal additive manufacturing will be discussed with a highlight to the variety of technologies currently in use and identify the industry leading techniques. The core principals of each will be presented along with comparisons and use cases for each.

Powder Metallurgy Versus Conventional Processing

With Prof. Diran Apelian or Dr. Ben MacDonald

Powder metallurgy as a class of processing technologies will be covered with an emphasis to the key differentiations with conventional processing. The implication of critical solidification parameters including cooling rate will be reviewed as they affect the refinement of microstructures and the presence of metastable structures. Traditional consolidation approaches to creating bulk parts will be discussed as well as the use of metal powder as a feedstock to additive manufacturing.

The Linkage of Processing Structure Properties

With Dr. Ben MacDonald

This lecture will serve to established and review the core metallurgical principles that are essential to understanding materials as a system. With an overview of the hierarchical structural features of metals, fundamentals of solidification, wrought processing, and heat treatment, the interconnected relationships of processing, structure, and properties will be established.

Current Trends in Light Weighting of Structural Materials

With Prof. Diran Apelian

This lecture will serve as a motivation for the course with emphasis on current trends in light weighting of structural materials. Global context to the need for light weighting will be provided as it is critical to a variety of fields from aerospace to the electrification of transportation. Paths forward will be proposed, specifically the unique potential of metal additive manufacturing to accomplishing these goals. This lecture will conclude by introducing the structure of the lectures that will be presented in the course.