Scroll to Top
The IsoMet 1000 is a precision sectioning saw is designed for cutting various types of materials with minimal deformation. This precision cutting machine is ideal for delicate parts by only using gravity fed force. Its great versatility in chucking allows for holding all types of sample shapes and configurations giving today’s laboratory a precision cutting machine capable of sectioning virtually any material including brittle or ductile metals, composites, cements, laminates, plastics, electronic devices, and biomaterials.
Benefits

Flexible settings for varied sample preparation

  • RPM ranges from 100-975 to provide cut quality for varied materials
  • Table saw attachment for precisions sample alignment (accessory)
  • Great versatility in holding all types of sample shapes and configurations, gives today's laboratory a precision
  • Sectioning tool capable of cutting virtually any material including brittle or ductile metals, composites, cements, laminates, plastics, electronic devices and biomaterials. When equipped with the optional rotating chuck, sectioning times are dramatically reduced.

Excellent cut quality for delicate samples

  • Gravity fed cutting force to reduce deformation on delicate samples
Specifications
IsoMet 1000 Precision Cutter Specifications
Frequency universal
Voltage universal
Phase 1
Cutting Capacity 2.00[in], 50.00[mm]
Wheel Diameter 7.00[in]
Controls LED
Cut Action Gravity Fed Chop
Programmability No
Serial Capabilities No
Wheel Diameter 178[mm]
RPM @60 Hz 100 to 975
Ordering
Related Products

Accessories/Consumables

Coolant

Coolant

Precision Vises

Precision Vises
800 Gram Weight Set
800 Gram Weight Set
112183
Rotating Chuck Assembly
Rotating Chuck Assembly
112181
Table Saw Attachment
Table Saw Attachment
112182
Goniometer
Goniometer
112185
Swivel Arm Assembly
Swivel Arm Assembly
111181
Swivel Arm Assembly
Swivel Arm Assembly
112184
Table Saw Splash Guard
Table Saw Splash Guard
112186
Downloads
Videos
IsoMet 1000: How to Set Up the Table Attachment
IsoMet 1000: How to Set Up the Table Attachment

The Buehler IsoMet 1000 has the ability to be used as a gravity fed sectioning machine or as a hand-fed sectioning machine with a flat table. For sectioning of parts like electronic circuit boards which are harder to clamp, it can be ideal to hand-feed the part to ensure a good quality cut. To convert the machine to a hand-fed saw with a flat surface, disassemble the gravity fed sample holder and install the Table Saw Attachment (11-2182). We also highly recommend the Table Saw Splash Guard (11-2186) which increases safety during use.