AbrasiMatic™ 300 Automatic & Manual Abrasive Cutter


The AbrasiMatic 300 is a benchtop dual abrasive cutting machine. This abrasive cutter enables variety in sample preparation to best fit each sample process with both manual and automatic abrasive cutting capabilities.

The manual and automatic abrasive cutting machine that can handle the abrasive environment with a stainless steel T-Slot bed.

Flexibility for changing lab needs

  • Best of both cutting methods with manual and automatic cutting
  • Control and "feel" of the cut with the manual cutting in the Y and Z direction
  • Allow for sectioning of parts with a 4.5in diameter. (varies based on part shape)

Highly reproducible results

  • Consistent and repeatable cuts with the automatic cutting in the Y direction

Simple setup for efficient cuts

  • Quick vising and cut alignment with x-axis motion (optional)
  • Simple user interface to program automatic cutting and set manual cutting
  • The automatic cutting creates more time for critical activities
  • Electrical break for user safety and quick part change

Durable machine design

  • A machine that can handle the abrasive environment with a stainless steel T-Slot bed

AbrasiMatic™ 300 Automatic & Manual Abrasive Cutter
AbrasiMatic™ 300 Automatic & Manual Abrasive Cutter Specifications
Voltage/Frequency/Phase 230VAC, 60Hz; 460VAC, 60Hz; 220VAC, 50Hz; 380VAC, 50Hz / 3 phase
Power Consumption 4.0kW
Maximum Current 15.7amps @ 220/230VAC; 7.9amps @ 460VAC; 9.1amps @ 380VAC
Motor Power 5Hp [3.7kW] Lighting Two LED Goosenecks
Recirculation Tank Capacity 22gal [83ℓ]
Hose Fitting Sizes Intake: 1in [25mm]; Discharge: 2in [50mm]
Sound Rating 78dBA - no load
Fume Extractor Size 3in [75mm] cut-out diameter
Control Panel 7in [175mm] diagonal; 320x240 pixels; 256 color screen, backlight NEMA4 [IP 65] water resistant
T-slot table dimensions 14.375 W x 10in D [365 x 254mm]; 12mm wide t-slots
Travel movement Z-Axis: 5.75in [150mm]; Y-Axis: 10.25in [260mm]; X-Axis: 2.75in [70mm]
Auto Y-Axis Feed Rate 0.3-5in/min [0.1-2.5mm/sec]
Window Size 14 W x 12in H [355 x 300mm]
Abrasive Wheel Diameter & Arbor maximum 12in [305mm] & 1.25in [32mm]
Wheel Speed 2600rpm @ 50/60Hz; 8200 surface ft/min [2700 surface m/min]
Maximum Cut Diameter 4.375in [110mm]
Cutting Wheel Torque 121 in/lb [14Nm]
Cutting Chamber 36 W x 22 D x 8in H [914 x 558 x 203mm]
Compliance CE

  Part Number Voltage Compatible Recirculating System
(not included)
Quick Quote
Y & Z-axis 10-2190-260 200-240VAC, 60Hz 10-2332-260 Quick Quote
Y & Z-axis 10-2190-460 440-480VAC, 60Hz 10-2332-460 Quick Quote
Y & Z-axis 10-2190-250 200-240VAC, 50Hz 10-2332-250 Quick Quote
Y & Z-axis 10-2190-400 380-400VAC, 50Hz 10-2332-400 Quick Quote
X,Y & Z-axis 10-2193-260 200-240VAC, 60Hz 10-2332-260 Quick Quote
X,Y & Z-axis 10-2193-460 440-480VAC, 60Hz 10-2332-460 Quick Quote
X,Y & Z-axis 10-2193-250 200-241VAC, 50Hz 10-2332-250 Quick Quote
X,Y & Z-axis 10-2193-400 380-400VAC, 50Hz 10-2332-400 Quick Quote

Accessories & Consumables for the AbrasiMatic™ 300 Automatic & Manual Abrasive Cutter

Abrasive Blades
Abrasive Blades
Abrasive Vises
Abrasive Vises
Diamond and CBN Blades
Diamond and CBN Blades
Coolant
Coolant
Recirculation System 22 gal [90 L]
Recirculation System
102332260 [200-240 VAC, 60 Hz]
102332460 [440-480 VAC, 60 Hz]
102332250 [200-240 VAC, 50 Hz]
102332400 [380-400 VAC, 50 Hz]


AbrasiMatic™ 300 Automatic & Manual Abrasive Cutter
Watch the AbrasiMatic™ 300 Automatic & Manual Abrasive Cutter Video