Crystalbond LT is perfect for temporarily mounting objects to glass slides, polish and then remove. This adhesive has low adhesion strength and is good for applications where easy sample removal is important. Crystalbond LT is easily removable with hot water. Characteristics of Crystalbond LT are:

CarbiMet® 2 Abrasive Discs are the new premium line of grinding papers designed for superior grinding performance on all types of specimens with minimal deformation. These discs are designed for wet or dry grinding; however, wet grinding induces less deformation in specimens. The tightly held abrasive grain sizing and the environmentally friendly resin bond system gives CarbiMet 2 Abrasive Discs the rapid material removal and uniform finish needed to reduce rough and final polishing times. Manufactured in an ISO 14001/2004 certified facility, CarbiMet 2 Abrasive Discs are produced with less pollution, in part due to an efficient water and air recycling system. The uniformity and consistency of these discs make them an excellent choice for use with automatic grinding and polishing systems.

Please check out our micro-site at:  http://www.buehler.com/carbimet2.htm. Be sure to provide feedback on the information provided, by clicking on the link at the bottom of the page.

TexMet® is a firm, dense, hard polishing cloth with excellent uniformity. This premium polishing cloth was designed with a non-woven pad for exceptional surface finish. It can be used on a variety of materials, from ferrous, non-ferrous as well as both hard and soft materials. For best results partner the TexMet® cloth with a diamond suspensions/paste, from 25 micron or finer. TexMet® is an exceptional general purpose cloth when striving for outstanding edge retention and flatness of the specimen.

Please check out our micro-site at: http://www.buehler.com/texmet.htm. Be sure to provide feedback on the information provided, by clicking on the link at the bottom of the page.

Apex® DGD Green - 240 micron and Apex® DGD Black - 125 micron, resin bonded, diamond grinding discs provides long wear, resin-bonded, fixed abrasive surfaces for every application. These discs provide high removal rates, excellent edge retention, and flatness. Bonding characteristics allow these discs to be used on a wide variety of materials, including softer materials such as brass and copper.