| Lapro®
Slab Saw 24" |
|
| • |
Lapidary Slab Saw
for Cutting Minerals, Rocks and Concrete |
|
| • |
24" (610mm) Diamond
Blade with 9" (229mm) Cutting Depth |
|
| • |
Convenient Sloped
Bottom with Drain, for Easy Coolant Removal |
|
| • |
Screw Drive Feed |
|
| • |
Three Adjustable
Feed Rates |
|
| • |
Bronze Clutch Cam
Engage/Disengagement Lever Actuated System |
|
| • |
Vise Opens up to 17"
(432mm) |
|
| • |
Clear Cover to View
Sample During Cutting |
|
| • |
Cast Iron Vise with
Hardwood Jaws |
|
|
|
|
| |
| Trim
Saw
|
|
| Trim
Saws are used for Cutting Minerals, Rock and Concrete |
|
| 6"
Buehler Trim Saw |
|
| • |
Manual Saw Feed |
|
| • |
Self-aligning
Table-top for Easy Removal |
|
| • |
Adjustable Blade
Guard |
|
| • |
Optional Rock Vise |
|
| 10"
Buehler Power Feed Trim Saw |
|
| • |
Automated, Clutch Activated
Power Saw Feed and Shut-off |
|
| • |
Hand Feeding of Vice Option |
|
| • |
Toggle Switch for Independent
Operation |
|
| |
|
|
| |
|
|
|
|
|
|
| VibroMet®
2 Vibratory Polisher |
|
| • |
Prepares geological,
ultra-thin sections of 5 to 10 microns |
|
| • |
Utilizes hotizontal
vibratory motion, 7200 cycles per second |
|
| • |
Produces superior quality and
exceptional flatness |
| • |
Large, 12" (305mm) diameter
bowl holds multiple samples |
| • |
MiniMet Thin Section Holder fits
in standard VibroMet specimen holder
|
| |
|
|
|
|
| |
| PetroThin®
Thin Sectioning System |
|
| • |
Ultra-thin
sectioning bench-top product will cut and grind down to 30um or less depending
on the hardness of the material |
|
| • |
Features: |
|
| |
- Holds 5 different size glass
slides |
|
| |
- Vacuum slide chuck |
|
| |
- Cooling system uses water or
propylene glycol |
|
| |
-
8" (203mm) diamond blade capacity for cutting non-metallics |
|
| |
- 8" (203mm)
cup wheel for grinding |
|
|
|
|
| |
| IsoMet®
Family
|
|
| • |
Thin sectioning
bench-top cutters |
|
| • |
IsoMet®
Low Speed Saw
|
|
| |
-
5" (127mm) blade capacity, micrometer, 0-300 rpm |
|
| • |
IsoMet®
1000 Precision Saw |
|
| |
-7" (178mm)
blade capacity, micrometer, 0-950 rpm |
|
| • |
Can be upgraded with versatile
accessories: |
|
| |
- Rotating/Oscillating Vice for
quicker cuts of large specimens |
|
| |
- Table saw for cutting out
sections from PCB's and other specimens |
|
| |
- Goniometer for sectioning
crystals along specific planes |
|
| • |
IsoMet®
4000 Linear Precision Saw |
|
| |
- 8" (203mm) blade
capacity, micrometer, 200-5,000 rpm |
|
| • |
IsoMet®
5000 Linear Precision Saw |
|
| |
- Same as IsoMet 4000, but with
programmability and automatic serial cutting |
|
|
|
|
| |
.gif){kind=small}
