Electronics  
Show me info
 
Show me info
 
 
Click here to See the Calce and Buehler Schedule
 

Image Analysis Software Presentation

 

Image Capture

 
Macro – overview shots
Micro – light optical, SEM
Image Capture Tools  
Multilevel focus
Montage
Image comparison
Measurements  
Manual interactive
Automated
Add Annotations  
Database  
Organize and track information over time
Create reports - Word, excel
Email cases as html files to a client
PetroThin 
												for the Decapsulation of Electronic Packages
 
PetroThin for the Decapsulation of Electronic Packages  
Mechanical Decapsulation of microelectronic packages with the PetroThin, offers numerous advantages;  
Metal and ceramic packages that are resistant to chemical attack can easily be prepared  
Multiple packages can be decapsulated at the same time  
Decapsulate large packages up to 2”x2” in size  
Multilayer stacked die are quickly removed  
PetroThin 
												for the Decapsulation of Electronic PackagesIC Backside Grinding
 
MPC™ 2000 Cross-Sectioning System  
Semi-Automatic System designed to accurately cross-section a pre-specified point in an Integrated Circuit (IC) specimen  
Accurate cross-sectioning within ± 1 micron of target feature eliminates fear of grinding beyond the plane of interest  
Reduce the number of grinding steps resulting in increased specimen through put and productivity  
Accessory microscope makes specimen tilt alignment simple  
Remote Digital Display provides the freedom to position the micrometer readout in a convenient place, while enlarging the display or enhanced readability  
Variable speed motor of 1-50 rpm  
MPC 2000 Cross-Sectioning System
 
MicroPrecise Tri-Point Polisher Kit  
Wedge Polishing and Cross-Sectioning Kit for TEM, SEM and LOM Sample Preparation  
Mounting Bracket with Retractable Support for Inverted Stage Microscope Viewing  
Adjustabe Support Leg for Stereo Microscope Viewing  
Available with Standard Stainless Steel, or Non-rotating Micrometers  
MicroPrecise Tri-Point Polisher Kit
 
MPC™ 3000 Micro Precise Back-Side Grinding System  
Backside thinning of flip chip devices for thermal emissions studies  
Automated leveling  
Digital micrometer adjustmen to control sample height  
Positioning accuracy of ± 2.5um  
Diamond down stops which ensure removal of only the desired quantity of material  
Vacuum mounting of the specimens  
Precision laped stainless steel grinding wheel  
Variable speed grinding wheel 10-500 rpm  
MPC 3000 Micro Precise Back-Side Grinding SystemMPC 3000 Micro Precise Back-Side Grinding System
 
NelsonZimmer® 2000 High Volume Printed Wiring Board
Preparation System
 
High volume, printed wiring board (PWB) preparation system developed to accurately and reproducibly cross-section PWB's  
Easy-to-use system allows multiple users and laboratory metallographers, even those not familiar with specimen preparation techniques, to get quick, accurate centerline cross-sections  
Reproducible accuracy with through-hole diameters to 0.008" (200um)  
Meets stringent military specifications MIL-PRF-55110  
Cross-section 36 coupons (72 holes) at one time  
View Printed Wiring Board Paper  
NelsonZimmer 2000 High Volume Printed Wiring Board Preparation System
 
NelsonZimmer® 3000 High Volume Printed Wiring Board
Preparation System
 
High volume, printed wiring board (PWB) preparation system developed to accurately cross-section plated through-holes  
Easy-to-use system allows multiple users and laboratory metallographers, even those not familiar with specimen preparation techniques, to get quick, accurate centerline cross-sections  
Reproducible accuracy with through-hole diameters to 0.004" (100um)  
Meets stringent military specifications MIL-PRF-31032  
Cross-section 18coupons (36holes) at one time  
View Printed Wiring Board Paper  
NelsonZimmer 3000 High Volume Printed Wiring Board Preparation System
 
PWB Met™ Small Hole Accessory  
The PWB Met Small Hole Accessory is designed to meet the printed wiring boards industry demands that requre the use of smaller through-holes  
Suitable for Microvia holes  
Accurate down to 0.004" (100um) diameter holes  
Enhances productivity-holding 18 coupons  
Mounts on any standard 12" (30.5cm) grinder-polisher  
Precision poly-crystalline stops  
Resin casting within the accessory  
View Printed Wiring Board Paper  
PWB Met Small Hole AccessoryPWB Met Small Hole Accessory
 
PWB Met™ Digital Alignment Drill with Color Monitor  
Precision Digital Reference Printed Wiring Board Drill  
Provides a Common Reference for Multiple Coupons within Multiple Mounts  
Digital Alignment System  
Accuracy for Cross-Sectioning Microvia Holes  
Easy to Calibrate  
10X Color Camera and Reticule Line Alignment  
Granite Base and Cast Iron Supports for Accuracy  
Compatible with PC-Met & PWB Met Cross-sectioning Accessories  
2-Year Warranty  
PWB Met Digital Alignment Drill with Color Monitor
 
PWB Met™ Router  
PWB Met Router is designed to meet the needs of the Printed Wiring Board Industry. Its features include the following;  
Routs Coupons from most locations on Printed Wiring Boards
Routs without Stress or Deformation of Coupons
Ideal for Multi-Layer Boards
Self-Contained Vacuum System
DC Router Motor
2 Year Warranty
PWB Met Router
 
Punch and Die Set  
Generate coupons from printed wiring boards with a recessed Punch and Die Set  
A recessed face minimized any damage to the center of the coupon  
No. 60-5058 Recessed Face Punch and Die set for 1" (25mm) wide coupons  
Decapsulate large packages up to 2”x2” in size  
Multilayer stacked die are quickly removed  
Punch and Die Set
Show me info
View
Show me info
Print
 
Precision Table for 4” Wafer  
Part numbers 11-2694-160 & 11-2694-250 for use with the IsoMet 4000 & 5000 precision saws  
IsoMet 5000
Show me info
View
Show me info
Print
 
IsoMet® 1000 Precision Saw  
(178mm) blade capacity, micrometer, 0-950 rpm  
Can be upgraded with versatile accessories  
Table saw for cutting out sections from PCB'S and other specimens  
IsoMet 1000 Precision Saw
 
Target Holder for Controlled Material Removal  
MicroElectronic Components such as BGA Solder Balls or Cu Plated Through Holes  
Bulk or Glass Slide Mounting Specimens  
For Hand-held or Semi-automatic Specimen Preparation  
For Mounted Samples of 25mm, 30mm, 40mm, 1″, 1 1/4″ and 1 1/2″ in Diameter  
All holders utilize a precise scale allowing you to extend perimeters within 20 microns or better. Different inner parts allow various functions to be performed. The Target Holders have interchangeable stop rings of different material making it possible to use both soft and hard abrasives.  
All target holders can be used in the VibroMet® 2 Vibratory Polisher  
Target Holder for Controlled Material Removal